FEATURES
1. For plain shafts
2. Single seal or dual seals
3. Elastomer bellows rotating
4. Unbalanced seal, The MG1 can also be used as multiple
(tandem) seals or in a back-to-back arrangement. Installation
proposals can be supplied as request. Individual's sized for specific
conditions, e. G. Shaft in inches or special seat dimensions are
available as request.
5. Independent rotation direction
6. No torsion on bellows
Advantages
1. Shaft protection on full-scale
2. Thanks to special bellows design, Preservation of the seal face was good during installation.
3. Large axial movement ability enable mechanical seals to meet high speed axial rotation.
4. Universal industrial applications
5. Important material certifications available
6. High flexible and wide extended materials
7. Some of FDA mediums are agreeable.
8. Special design for hot water pumps (RMG12) available
9. Individuals with special dimensions and additional seats available
Conditions and Operating range
1. Pressure: 0~1.6MPa
2. Temperature: -20° C~ 80° C
3. Shaft diameter: d=10 -100 mm (0.39"...3.94")
4. Sliding velocity: Vg = 10 m/s (33 ft/s)
5. Applicable medium: Water, oil, chemical, dairy,
beverage; designed for containing solids e.g... in
waste water, sewage proposal and light mud
Materials
Metal parts: Metal 316, 304, 2Cr13 Single Spring
Friction Elements: Silicon carbide or hard alloy,
Carbon/ Ceramic
Auxiliary seal: Nitrile, Viton
1. For plain shafts
2. Single seal or dual seals
3. Elastomer bellows rotating
4. Unbalanced seal, The MG1 can also be used as multiple
(tandem) seals or in a back-to-back arrangement. Installation
proposals can be supplied as request. Individual's sized for specific
conditions, e. G. Shaft in inches or special seat dimensions are
available as request.
5. Independent rotation direction
6. No torsion on bellows
Advantages
1. Shaft protection on full-scale
2. Thanks to special bellows design, Preservation of the seal face was good during installation.
3. Large axial movement ability enable mechanical seals to meet high speed axial rotation.
4. Universal industrial applications
5. Important material certifications available
6. High flexible and wide extended materials
7. Some of FDA mediums are agreeable.
8. Special design for hot water pumps (RMG12) available
9. Individuals with special dimensions and additional seats available
Conditions and Operating range
1. Pressure: 0~1.6MPa
2. Temperature: -20° C~ 80° C
3. Shaft diameter: d=10 -100 mm (0.39"...3.94")
4. Sliding velocity: Vg = 10 m/s (33 ft/s)
5. Applicable medium: Water, oil, chemical, dairy,
beverage; designed for containing solids e.g... in
waste water, sewage proposal and light mud
Materials
Metal parts: Metal 316, 304, 2Cr13 Single Spring
Friction Elements: Silicon carbide or hard alloy,
Carbon/ Ceramic
Auxiliary seal: Nitrile, Viton